Defect Classification - During Inspection (Packaging Defects)

During inspection many times we got some defects. All the defect are not same and not have the same importance. Out of these defect some are major and some defect is minor.

Many times we become confused to take a decision that, which is major and which minor. Today I am going to share some information with all of you regarding this issue. Also, I am going to share a list defects with major and minor classification. In this regards please note, these classifications are not fixed, it can be varied based on buyer view.

Major Defect: Anything which adversely affects the appearance, performance, including fit or customer satisfaction to a degree that would provide a discerning customer with justification for non-purchase, a return or complaint .

Minor Defect: Any variation from a standard which is not sufficient in degree to be classified as major

Today I will discuss regarding Packaging Defects

Defect Classification
Packaging
Sl.	Classification	Major	Minor
1	Garment Size Mismatching hang tag	X
2	Garment Color Mismatch hang tag	X
3	Garment size Mismatching Carton shipping mark Size	X
4	Hang Tag Color Code Mismatch to Carton Shipping Mark Color	X
5	Shading between garment to garment in a pre-pack	X
6	Wrong Assortment in a pre-pack	X
7	Wrong Merchandiser Vs Carton shipping mark	X
8	Hang Tag inside Poly Bag	X
9	Carton empty space excess 3cm	X
10	Poly bag without Self adhesive tape	X
11	Carton not comply to Quality Standard	X
12	Packing Strip not comply to Standard	X

Best regards

Enamul Haque Bipul
Mob: +8801717264756
Skype: bipul1984
E-mail: ehbipul@gmail.com

Defect Classification - During Inspection (Sizing and Labeling)

During inspection many times we got some defects. All the defect are not same and not have the same importance. Out of these defect some are major and some defect is minor.

Many times we become confused to take a decision that, which is major and which minor. Today I am going to share some information with all of you regarding this issue. Also, I am going to share a list defects with major and minor classification. In this regards please note, these classifications are not fixed, it can be varied based on buyer view.

Major Defect: Anything which adversely affects the appearance, performance, including fit or customer satisfaction to a degree that would provide a discerning customer with justification for non-purchase, a return or complaint .

Minor Defect: Any variation from a standard which is not sufficient in degree to be classified as major

Today I will discuss regarding Sizing and Labeling


 

Defect Classification
Sizing, Labeling
Sl.	Classification	Major	Minor
1	Top and bottom sizes of a 2-part set MIS-MATCH	X
2	Missing Main Label	X
3	Main Label stitch < reverse side >	X
4	Main Label stitch untidy	X
5	CARE, FIBER CONTENT or COUNTRY OF ORIGIN details
	Are MISSING	X
6	Labels are POORLY POSITIONED
	More than 1cm out of position or off-center	X
	Between 0.5cm to 1cm out of position or off-center		X

Best regards

Enamul Haque Bipul
Mob: +8801717264756
Skype: bipul1984
E-mail: ehbipul@gmail.com

Defect Classification - During Inspection (Appearance Defects)

During inspection many times we got some defects. All the defect are not same and not have the same importance. Out of these defect some are major and some defect is minor.

Many times we become confused to take a decision that, which is major and which minor. Today I am going to share some information with all of you regarding this issue. Also, I am going to share a list defects with major and minor classification. In this regards please note, these classifications are not fixed, it can be varied based on buyer view.

Major Defect: Anything which adversely affects the appearance, performance, including fit or customer satisfaction to a degree that would provide a discerning customer with justification for non-purchase, a return or complaint .

Minor Defect: Any variation from a standard which is not sufficient in degree to be classified as major

Today I will discuss regarding Appearance Defects

Defect Classification
Appearance Defects
Sl.	Classification	Major	Minor
1	BURN or SCORCH MARKS on the surface of the fabric resulting in
	Discoloration or a “shiny” appearance
	Adversely affecting appearance	X
	Apparent but not obvious		X
2	Excessive CREASING or MARKING of the fabric.
	Adversely affecting appearance	X
	Apparent but not obvious		X
3	Generally UNBALANCED or UNEVEN appearance to the garment
	Adversely affecting appearance	X
	Apparent but not obvious		X
4	Excessive quantity and length of LOOSE threads or Hanging threads
	More than one, longer than 1/2” on outside of garment	X
	More than two, longer than 1” on inside of garment		X
5	FRAYING FABRIC, RAW or UNFINISHED edges which look unsightly
	Adversely affecting appearance	X
	Apparent but not obvious		X
6	MIS-MATCHING CHECKS, PLAIDS or STRIPES* on the center-front,
	Center-back, pockets, plackets or collars, pkt flaps, or sleeves to match the body
	Adversely affecting appearance	X
	Apparent but not obvious		X
7	MIS-SHAPEN, MIS-FORMED or MIS-PLACED panels or parts
	Including lapels, collars, facings, interlinings straps, plackets,
	Darts, waistbands, pockets, belt loops.
	Adversely affecting appearance	X
	Apparent but not obvious		X
8	Poorly PRESSED garments objectionably affecting appearance.
	Adversely affecting appearance	X
	Apparent but not obvious		X
9	Any part of the garment which is either rough or abrasive and
	Might cause IRRITATION or DISCOMFORT to the wearer	X
10	Any MARKS, STAINS, DIRT or OIL STAINS
	Adversely affecting appearance	X
	Apparent but not obvious		X
11	Garment crashed in packing		X
12	Garment has odors	X
13	Garment still wet in the poly bags	X

Best regards

Enamul Haque Bipul
Mob: +8801717264756
Skype: bipul1984
E-mail: ehbipul@gmail.com

Defect Classification - During Inspection (Buttons & Button Holes Defects)

During inspection many times we got some defects. All the defect are not same and not have the same importance. Out of these defect some are major and some defect is minor.

Many times we become confused to take a decision that, which is major and which minor. Today I am going to share some information with all of you regarding this issue. Also, I am going to share a list defects with major and minor classification. In this regards please note, these classifications are not fixed, it can be varied based on buyer view.

Major Defect: Anything which adversely affects the appearance, performance, including fit or customer satisfaction to a degree that would provide a discerning customer with justification for non-purchase, a return or complaint .

Minor Defect: Any variation from a standard which is not sufficient in degree to be classified as major

Today I will discuss regarding Buttons & Button Holes Defects

Defect Classification
Buttons & Button Holes Defects
Sl.	Classification	Major	Minor
1	Button is MISSING, DAMAGED or covered button has SEPARATED	X
2	Button attachment is LOOSE or INSECURE	X
3	Buttons or Button Holes are out of ALIGNMENT or IMPROPERLY
	SPACED, affecting appearance and resulting in distortion
	Adversely affecting appearance	X
	Apparent but not obvious		X
4	Button Loops are IRREGULAR or INCONSISTENT in size, shape or
	Position, affecting appearance and resulting in distortion.
	Adversely affecting appearance	X
	Apparent but not obvious		X
5	Button hole is generally UNTIDY, FRAYING, or contains
	BROKEN STITCHES
	Adversely affecting appearance	X
	Apparent but not obvious		X
6	Button hole is TOO SMALL or TOO LARGE.		X
7	Snap is too loose or too tight		X

Best regards

 

Enamul Haque Bipul
Mob: +8801717264756
Skype: bipul1984
E-mail: ehbipul@gmail.com

Defect Classification - During Inspection (Trimmings Defects)

During inspection many times we got some defects. All the defect are not same and not have the same importance. Out of these defect some are major and some defect is minor.

Many times we become confused to take a decision that, which is major and which minor. Today I am going to share some information with all of you regarding this issue. Also, I am going to share a list defects with major and minor classification. In this regards please note, these classifications are not fixed, it can be varied based on buyer view.

Major Defect: Anything which adversely affects the appearance, performance, including fit or customer satisfaction to a degree that would provide a discerning customer with justification for non-purchase, a return or complaint .

Minor Defect: Any variation from a standard which is not sufficient in degree to be classified as major

Today I will discuss regarding Trimmings Defects


 

Defect Classification
Trimmings Defects
Sl.	Classification	Major	Minor
1	Missing the grommets on garments	X
2	LACE irregular shape, poorly positioned or untrimmed
	Adversely affecting appearance	X
	Apparent but not obvious		X
3	BOW or MOTIF poorly positioned or loosely attached
	Misplaced by more than 1/4 “	X
	Misplaced by 1/8”		X
	Loosely attached		X
4	EMBROIDERY or APPLIQUE poorly positioned, untidy or Unfinished
	Adversely affecting appearance	X
	Apparent but not obvious		X
5	HOOKS & EYES or PRESS FASTNERS poorly positioned, missing or
	Mis functioning.
	Adversely affecting appearance	X
	Apparent but not obvious		X
6	ZIP malfunctions or poorly inserted
	Adversely affecting appearance or operation	X
	Apparent but not obvious		X
7	Teeth Tape & Zipper head matching
	Adversely affecting appearance or operation	X
	Apparent but not obvious		X

By Enamul Haque Bipul
Uttara Dhaka

Cotton Price (Indian) 29th August 2014

Please find below the Indian cotton prices for your ref.

 Prices for Indian Cotton 29AUGUST 2014

INDIAN COTTON 2013-2014	Shipment Sep-Oct 2014	Rate/CIF Lb
Quality	Specifications	Chittagong
S-6 Super (2013-2014)	1.5/32” G5 28 GPT	USCents 89.92
S-6 (2013-2014)	1.1/8” G5 28 GPT	USCents 88.92
DCH-32	34mm 3-3.3 NCL 30 GPT	USCents 126
MCU 5	31 mm G5 30 GPT	USCents 97
J34		USCents 94
Desi GATP Opener	12-14mm 5.0/7.0 NCL18 GPT	USCents 95
V797	22mm 3.7/5.5NCL T14 M10	USCents 63
Fair Trade Cotton> FLO	1.1/8” G5 28 GPT	USCents 94
BCI Cotton	1.1/8” G5 28 GPT
Organic>CU/Eco/Noca/FT	1.1/8” G5 28 GPT	USCents 94
S-6 Super (2014-2015)	1.5/32” G5 28 GPT	USCents 83

Best regards

Enamul Haque Bipul
Mob: +8801717264756
Skype: bipul1984
E-mail: ehbipul@gmail.com